safety data sheets2020-09-12T15:56:18-06:00

PRODUCT AND SAFETY DATA SHEET LIBRARY

Strong By Nature
Garage Flooring System

The Hemp Coat™ floor coating system is comprised of a proprietary two-part base coat and two-part

topcoat. We’ve worked with some of the top companies in the world to develop this unique product line to offer our clients.

Our Hemp Coat™ base coat blend is produced from a mixture of natural products including plant based oils, gypsum, hemp and a bonding agent similar to that found in high strength adhesives. We offer various topcoat systems based on your specific application. Please see the enclosed product data and SDS.

Hemp Coat™ floor coating systems are VOC Compliant in all 50 states, Canada, Australia and various countries throughout Europe.

Hemp Coat™ floor coating systems are USDA and FDA certified for incidental food contact

PRODUCT AND SAFETY DATA SHEET LIBRARY

Download PDF

The following is a list of precautions based on each state of the product. The first two precautions only apply to the installation crews. Please keep in mind that once the product cures, it is completely inert.

Base Coat Precautions:

Initial State: Each of Part A and Part B as separate items. The current SDS describes the hazards of these separate parts sufficiently.

State 2: Parts A+B combined to cure. Manually applied material results in little to no exposure to airborne particles.

Final State: Parts A+B combined after curing is completed. All of Part B will have been fully reacted. The cured material is inert. We do not know of any hazards other than those described as “nuisance dust particles” where the cured product is sanded or otherwise abraded.

Top Coat Safety Data Information

Download PDF
Download PDF
Download PDF
Download PDF
Download PDF

INSTRUCTIONAL MANUALS

Download PDF
Download PDF
Download PDF

Mixing is Critical

The key to a successful project is a combination of prep and knowing how to work with the material.

Make sure you watch this video and learn the steps for proper mixing.

  1. We recommend Part A be stored at room temperature. No less than 32°F (0°C).
  2. The Part A bucket should be stored upside down for ease of mixing when used. Turn bucket upside (minimum, at least one day) before use.
  3. We recommended Part B be stored at temperatures between 75° to 105°F (24° to 41°C).
  4. Products must be kept free of moisture. Keep the containers closed because the product absorbs moisture from the air over time. Moisture in the product causes it to produce CO2 gas which may cause pressure build-up inside a sealed container.

HEMPCOAT™ base has no solvents, is self leveling and once installed dries quickly. This thicker system is perfect for filling cracks and imperfections on new or tired old warehouse floors. Recommended thickness of 32 mils (250 sf / 5 gal) Coverage: 200-250 sq ft. / Kit. depending on technique & surface condition.

  1. You will only have 30 to 40 minutes (See curing estimates chart) to apply your coating material (after Part A and Part B are mixed together) to coat your surfaces before the coating material starts to harden.
  2. In order to begin coating, the substrate must be dry which is generally not achievable without having the dew point temperature being at least 5°C or 10°F below the substrate temperature.
Need a Professional Flooring Installer?2020-05-01T07:55:25-06:00

We have a network of installers for you to choose from.

What other areas can you apply HempCoat™ ?2020-05-01T16:01:32-06:00

Offices, Bathrooms, Trimming areas Laboratories Garages

Do you need help planning your floor coating project?2020-04-30T13:49:15-06:00

Allow the HempCoat Team to help you plan your floor coating project. Our team of industry experts provides you with product recommendations. Furthermore, we will work hand-in-hand with your qualified contractors to ensure the end results exceed your expectations.

What is the lead time for a large order?2020-09-13T10:41:28-06:00

Large volume orders may have up to a 2-3 week lead time based on size.  We try to mantain an inventory while providing our customer with fresh product.

What’s Included in a Value Pack?2020-04-30T13:41:30-06:00

Value Packs are pre-designed to make ordering simple and cost-effective.  The appropriate amount of Top Coat paired with the necessary amount of HempCoat™ Base Coat.

What are the storage recommendations for HempCoat?2020-09-13T10:46:20-06:00
  1. It is recommended that Part A be stored at room temperature. No less than 32°F (0°C).
  2. The Part A bucket should be stored upside down for ease of mixing when used. Turn bucket upside (minimum. one day) before use.
  3. Recommended Part B be stored at temperatures between 75° to 105°F (24° to 41°C).
  4. Products must be kept free of moisture. Keep the containers closed because the product absorbs moisture from the air over time. Moisture in the product causes it to produce CO2 gas which may cause pressure build-up inside a sealed container.

Go to Top